易朋兴

编辑:摇头网互动百科 时间:2019-11-21 05:48:00
编辑 锁定
本词条缺少名片图,补充相关内容使词条更完整,还能快速升级,赶紧来编辑吧!
易朋兴 副教授 男,硕士生导师。近十年来主要从事设备监测、诊断与控制及工程机械绿色制造等领域的研究工作。先后主持或参与国家自然科学基金、863项目、国家科技支撑技术项目、航天支撑技术项目以及企业科技攻关项目等科研项目20余项。在国内外、发表科研论文30余篇,其中三大索引收录20余篇。获教育部科技进步二等奖1项,3项研究成果通过教育部组织的国防科技成果鉴定。
中文名
易朋兴
国    籍
中国
职    称
副教授
教学单位
华中科技大学

易朋兴主要研究方向

编辑
设备监测、诊断与控制
绿色制造

易朋兴开设课程

编辑
机械工程控制基础
数据库技术

易朋兴科研项目

编辑
[1] 国家科技支撑计划课题:轻量化桥式起重机推广应用技术研究,课题号2015BAF06B06,2015年1月—2017年12月,华中科技大学任务负责人;
[2] 国家863课题:工程机械回收与再制造关键技术研究与示范,课题号2013AA040206,2013年1月-2015年12月,课题副组长,华中科技大学任务负责人;
[3] 企业科技攻关项目:滚挂镀电镀设备的新技术研发与标准化设计,2013-2016,课题负责人;
[4] 江苏省科研平台项目:大型风电齿轮箱动态特性分析与优化设计,2011-2014,课题负责人;
[5] 企业技术攻关项目:搅拌器桨叶模拟设计,2012-2013,课题负责人;
[6] 国家自然科学基金面上项目:基于激光冲击波力学效应的微驱动技术与系统研究,2010-2012,副组长;
[7] 国家自然科学基金青年项目:高粘度多组分复合含能材料无桨混沌混合理论与方法研究,编号50803022,2009-2010,课题负责人;
[8] 企业科技攻关项目:小型样机研制,2009-2010,课题负责人;
[9] 企业科技攻关项目:工程机械再制造工艺、技术与设备规划,2009-2010,课题负责人。[1] 

易朋兴教学奖励

编辑
2012华中科技大学教学质量二等奖

易朋兴主要论文

编辑
[1] Kang Zhang, Pengxing Yi*, Xuming Zhang, Yahui Li, and Bing Hui. A new feature to evaluate the surface defects with the EMAT. NDT & E, 2015, submitted, corresponding author.
[2] Pengxing Yi*, Cheng Zhang, Lijun Guo and Tielin Shi. Dynamic Modeling and Analysis of Load Sharing Characteristics of Wind Turbine Gearbox. Advances in Mechanical Engineering, 2015, submitted, corresponding author.
[3] Penxing Yi*, Ming Huang, Lijun Guo and Tielin Shi. Dual Reverse Channel Decision in Retailer Oriented Closed-loop Supply Chain for Construction Machinery Remanufacturing. International Journal of Production Research, 2015, submitted, corresponding author.
[4] Min Huang, Pengxing Yi*, Tielin Shi and Lijun Guo. A modal interval based method for dynamic decision model in remanufacturing with uncertain quality of used products. International Journal of Intelligent Manufacturing, 2015, submitted, corresponding author.
[5] Chao Jin, Youmin Hu, Bo Wu, Pengxing Yi*, Yao Cheng. Thermal characteristics prediction of a CNC feed system under varying operating conditions. Precision Engineering, 2015, to be published, corresponding author.
[6] Pengxing Yi*, Lijian Dong, Tielin Shi. Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox. Frontier of Mechanical Engineering, 2014, to be published, DOI: 10.1007/s11465 -014- 0319 -5.
[7] Pengxing Yi*, Kang Zhang, Yahui Li, Xuming Zhang. Influence of the Lift-Off Effect on the Cut-Off Frequency of the EMAT-Generated Rayleigh Wave Signal. Sensors, 2014, 14(10): 19687-19699.
[8] 易朋兴,张成. 不同误差下风电齿轮箱均载与太阳轮轨迹关系研究. 装备制造技术,2014,3:25-28.
[9] Minyu Li, Bo Wu, Youmin Hu, Pengxing Yi*, Yao Cheng. An improved discrete particle swarm optimization algorithm for High-speed trains’ operation panel assembly sequence planning. Assembly Automation, 2013, 33(4): 360-373, corresponding author.
[10]Kang Zhang, Pengxing Yi*, Yahui Li, Xuming Zhang and Zailin Guan. Numerical Investigation of the lift-off effect on the cut-off frequency in the Rayleigh wave. In: the Proceedings of IEEE Mechatronika/Mechatronics 2014, Dec.3rd – Dec. 5th, 2014, Brno, Czech, corresponding author.
[11]Min Huang, Pengxing Yi*, Tielin Shi, Kang Zhang, and Lijun Guo. The study of multi-dimensional reverse channels for construction machinery remanufacturing. In: the 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), Jul. 30th - Aug 2nd, 2013, Xian, China, pp.116 – 119, corresponding author.
[12]Pengxing Yi*, Lijian Dong, Yuanxin Chen. The multi-objective optimization of the planet carrier in wind turbine gearbox. Applied Mechanics and Materials, Vols. 184-185, 2012, pp 565-569.
[13]Feng Xiong, Fengling Han, Pengxing Yi, Tielin Shi. Axial motion of flat belt induced by angular misalignment of rollers, 2009 IEEE International Conference on Mechatronics and Automation, Proc. of ICMA 2009, August 9th -12th ,2009,Changchun, China, pp. 3298-3303.
[14]易朋兴,刘世元,崔峰,胡友民. 复杂形面搅拌桨叶三维设计与优化系统. 宇航学报,2009,Vol.30(1): 76-81
[15]易朋兴,胡友民,崔峰,杜润生. 立式捏合机搅拌桨螺旋角影响研究.固体火箭技术,2008,30(5):381-385
[16]Yi, P.X., Liu, S.Y., Hu, Y.M., Liu, W. Reliability analysis of condition monitoring systems under fuzzy environment. Advanced Materials Research, 2008,Vol.44-46: 863-870
[17]Yi, Pengxing,Hu Youmin,Liu Shiyuan. Numerical investigation of effect of stirring blades on mixing efficiency of a planetary kneading mixer with Non-Newtonian and viscoplastic materials. AIP conference proceedings: 15th international congress on rheology - the society of rheology 80th annual meeting, Montery, USA, 2008,Vol.1027: 442-~444
[18]Tao Huang,Shiyuan Liu,Pengxing Yi,Tielin SHI. Focusing and leveling system for optical lithography using linear CCD. Proceeding of 2008 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Applications, edited by Shenghua Ye, Guangjun Zhang, Jun Ni, 2008, Proc. of SPIE Vol. 7160: 71602X
[19]Tao Huang,Shiyuan Liu,Pengxing Yi,Tielin SHI. Automatic alignment system for optical lithography based on machine vision. SPIE Proceedings: 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems, 2008, Proc. of SPIE Vol. 7284, 72840I
[20]Hu Youmin, Wu Bo, Yi Pengxing. Fuzzy Synthetic Evaluation Approach of Reliability for Condition Monitoring System. In: Proceedings of 1st International Conference Intelligent Robotics and Applications, Lecture Notes in Artificial Intelligence, 2008, 5315: 583-592
[21]易朋兴,胡友民,崔峰等. 立式捏合机捏合间隙影响CFD分析. 化工学报,2007,58(10):2680-2684
[22]Yi Pengxing,Hu Youming,Yang Shuzi,et al. System reliability analysis of redundant condition monitoring systems. In:Pro.of the first international symposium on digital manufacture,Journal of Wuhan University of Technology, Wuhan,China,2006,Vol.28:561-564 (EI收录号:070110349649)
[23]Yi Pengxing,Yang Shuzi,Du Runsheng,et al. Distributed monitoring system reliability estimation with consideration of statistical uncertainty. Chinese Journal of Mechanical Engineering (English Edition),2005,18(4): 519-524
[24]易朋兴,刘世元,杜润生. 分布式监测系统可靠性贝叶斯评估. 华中科技大学学报(自然科学版),2006,34(3):42-45
[25]易朋兴,杜润生,杨叔子等. 基于Markov模型的分布式监测系统可靠性研究. 机械工程学报,2005,41(6):143-148
[26]李邵鹏,刘宏杰,易朋兴,肖江文. 基于Pro/E 的注塑模具型腔的三维模型设计. 机械设计与制造,2007,8:176-177
参考资料
  • 1.    易朋兴  .华中科技大学机械科学与工程学院[引用日期2015-01-24]
词条标签:
行业人物 人物